Blue Sea Systems SI-ACR Automatic Charging Relay - 12/24V DC 120A
Model: 7610-BSS
Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking
Designed for 12 or 24 volt systems
12/24 volt auto ranging voltage input
Hermetically sealed contacts/vaporproof
Ignition protected—safe for installation aboard gasoline powered boats
Supports high-output alternators up to 120 Amperes
Dual sensing
Automatically combines batteries during charging, isolates batteries when discharging and when starting engines
SI-ACR automatically combines batteries during charging, isolates batteries when discharging and when starting engines. The Dual Circuit Plus™ Battery Switch simplifies the switching of two batteries to OFF or ON while still providing battery isolation between the engine and auxiliary battery. The Combine function can be used to parallel the batteries in the event of a low engine battery.
Specifications
Nominal Voltage
12V DC 24V DC
Start Isolation
Yes
Amperage Operating Current
175mA (combined) 15mA (open)
Terminal Stud Torque
140 in-lb (15.82 Nm)
Continuous Rating
120A
Intermittent Rating
210A (5 min)
Cable Size to Meet Ratings
1/0 AWG
Stud Material
Tinned Copper
Terminal Ring Diameter Clearance
1.12in (28.45 mm)
Terminal Stud Length
0.875in (22.23 mm)
Terminal Stud Size
3/8" - 16 (M10)
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty!