|
Details: |
|
Freedom HF Inverter/Chargers
Compact inverter/chargers to power the comforts of home on your boat, RV or
truck.
With modified sine wave output, Freedom HF 1000 and 1800 Inverter/Chargers
are designed to run entertainment systems and small appliances in smaller boats,
RV’s, and trucks. The Freedom HF Inverter/Chargers are the smallest, lightest,
and least expensive models in the Xantrex lineup.
Product Info
The Freedom HF is available in two sizes: 1000 watts with a 20-amp charger
and 1800 watts with a 40-amp charger. Both Freedom HF models are designed for
demanding marine and RV conditions. Temperature-controlled multistage charging
ensures that your batteries are recharged safely and efficiently. Both models
include an automatic transfer switch and a detachable digital remote control
panel display that provides precise system information and can be mounted
wherever you require the information.
Product Features
- Designed to power demanding loads such as microwave ovens, TVs, DVD
players, small appliances and other electronic equipment
- Removable digital display to provide system status
- Automatic three-stage battery charger
- Designed to be hardwired using a terminal strip, or by connecting AC
through GFCI
- receptacles (included)
- Built-in 30-amp relay to automatically transfer between inverter power
and incoming
- AC utility power
Protection Features
- Battery over-voltage and under-voltage protection
- Over-temperature shutdown
- Automatic overload protection
- Short-circuit protection
- Ground-fault protection
- ETL listed for use in mobile RV and marine applications
Specifications:
|
Electrical Specifications - Inverter |
|
|
|
|
|
|
|
Models |
HF 1000 |
HF 1800 |
|
|
|
|
|
Output power (continuous) |
1000 W |
1800 W |
|
Surge power |
2000 W |
3600 W |
|
Output frequency regulation |
60 Hz |
60 Hz |
|
Inverter voltage regulation |
115 +/-10 Vrms |
115 +/-10 Vrms |
|
Output wave form |
Modified sine wave |
Modified sine wave |
|
Efficiency (full load) |
> 82% |
> 82% |
|
Peak efficiency |
> 87% |
> 87% |
|
No-load current draw (idle mode) |
< 1 Adc |
< 1 Adc |
|
Off mode current draw (display off) |
< 5 mA |
< 5 mA |
|
|
|
|
|
Electrical Specifications - Charger |
|
|
|
Charge rate |
20 A |
40 A |
|
AC input voltage range |
95 – 130 Vac |
|
|
AC transfer relay |
30 A |
30 A |
|
Battery voltage (nominal) |
12 Vdc |
12 Vdc |
|
Battery voltage range |
10.5 – 15.5 Vdc |
10.5 – 15.5 Vdc |
|
Low battery cut-out |
10.5 Vdc |
10.5 Vdc |
|
AC input (max. charge) |
5 Aac |
9 Aac |
|
Default bulk charge voltage setting |
14.2 Vdc |
14.2 Vdc |
|
Default float charge voltage setting |
13.5 Vdc |
13.5 Vdc |
|
Equalize charge voltage (wet cell only) |
N/A |
N/A |
|
Battery charge outputs |
One |
One |
|
Charge control |
Three-stage |
Three-stage |
|
Battery type settings |
Flooded / Gel / AGM / Fixed 13.5 Vdc |
|
Equalization |
No |
No |
|
Internal temperature-sensitive charging |
Yes |
Yes |
|
|
|
|
|
General Specifications |
|
|
|
Optimal operating temperature range |
32°F to 104°F (0°C to 40°C) |
|
|
Optional remotes |
Detachable display |
Detachable display |
|
Unit weight |
10 lb (4.5 kg) |
12.8 lb (5.8 kg) |
|
Unit dimensions (H x W x L) |
4.2 x 9.5 x 15.5“ |
4.2 x 9.5 x 18.0“ |
|
|
(106 x 241 x 393 mm) |
(106 x 241 x 457 mm) |
|
Warranty |
One year |
One year |
|
Part number |
806-1020 |
806-1840 |
|
|
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty! |
|
|
