|
Garmin Striker 4 Color Fishfinder/GPS Track Plotter
3.5-inch CHIRP Fishfinder with GPS
- Easy-to-use 3.5-inch color fishfinder with
built-in, high-sensitivity GPS
- Find fish; mark and return to hot spots,
docks and ramps
- Convenient keypad operation
- Includes CHIRP (77/200 kHz) sonar
transducer; transmit power (200 W RMS)/(1,600 W peak-to-peak)
- Upgrade to high performance CHIRP with a GT8
or GT15 transducer (each sold separately)
Finding fish is easier than ever with STRIKER 4
fishfinder. Mark and return to your hot spots, boat ramps and docks, and share
your favorite waypoints and routes with other STRIKER and echoMAP combos. Smooth
Scaling graphics provide uninterrupted imagery when switching between
depth-range scales. Sonar history rewind allows you to scroll back through sonar
images to mark waypoints you originally may have missed. Plus, it has a built-in
flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz)
transducer with transom and trolling motor mounting hardware and cable. For
high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold
separately).
Experience the Clarity of CHIRP
STRIKER 4 fishfinder includes a Garmin CHIRP
(77/200 kHz) transducer, which provides a visibly higher level of clarity and
detail for fish and structure than traditional 77/200 kHz transducers.
Instead of sending just 1 single frequency, CHIRP
sends a continuous sweep of frequencies, ranging from low to high, then
interprets them individually upon their return. Since the frequencies provide a
wider range of information, CHIRP sonar technology can create crisper fish
arches with greater target separation.
You also can upgrade to high-performance Garmin
CHIRP technology, which provides crystal-clear sonar images with even more
remarkable target separation and resolution from shallow to deeper depths. For
better fishing, bottom contours are more visible, even at higher speeds, and
signal noise can be suppressed at greater depths to provide a more timely
interpretation of what’s below.
Mark Spots with High-sensitivity GPS
Unlike regular fishfinders, STRIKER fishfinders
have built-in, high-sensitivity GPS to locate your current position quickly and
precisely, then maintain your GPS location anywhere you go on the lake. More
importantly, they allow you to mark spots where the fish are biting so you can
return to them again in the future. You also can mark docks, boat ramps and
other locations on the lake. Just follow the path created on your screen to
return to them whenever you wish.
Navigate Easily with Waypoint Map
Since the STRIKER fishfinder series includes
high-sensitivity GPS, you can see your position in relation to waypoints you
have marked. Use the waypoint map to easily view, mark and navigate to locations
such as brush piles, stumps and docks. It’s also a great tool for finding your
way back to the boat ramp.
Check Your Speed on Screen
You can quickly and easily see your boat’s speed
on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are
trolling at the right speed for the lure you’re using and for a particular fish
species. It’s also a good way to tell if you are going the right speed in
wake-controlled areas.
Fish Vertically with Built-in Flasher
STRIKER provides you with both a fishfinder and
flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing
or jigging for crappie, the built-in flasher will show you the bottom, whether
it is solid or muddy, your jig or weighted bait, and the depth of fish as they
swim into the sonar beam. You can even watch how high your jig is being lifted
and dropped and whether fish move toward or away from it.
Take Your Fishfinder Anywhere
A portable kit is available to protect and carry
your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice
fishing. It includes a sealed, rechargeable battery with charger, built-in
transducer cable management and storage and suction cup transducer mount and
float.
Specifications
Physical & Performance
| Physical Dimensions |
3.6'' x 5.9'' x 1.6'' (91.6 x 150.8 x
42.8 cm) |
| Display Size, WxH |
1.9'' x 2.9'' (4.9 x 7.3 cm); 3.5'' diag,
(8.7 cm) |
| Display Resolution, WxH |
480 x 320 pixels |
| Display Type |
HVGA color |
| Weight |
8.1 oz (230 g) |
| Water Rating |
IPX7 |
| Audible Alarms |
Yes |
Sonar Features & Specifications
| Dual-frequency (50/200 kHz) sonar
capable |
Yes |
| Dual-beam (77/200 kHz) sonar capable |
Yes |
| Frequencies Supported |
Traditional: 50/77/200 kHz
CHIRP (mid and high) |
| Transmit Power |
200 W (RMS) |
| Maximum Depth |
1,600 ft freshwater, 750 ft saltwater |
| Bottom lock (shows return from the
bottom up) |
Yes |
| Water temperature log and graph |
Yes |
Fishfinder Features
| Split-screen zoom |
Yes |
| Ultrascroll (displays fish targets at
higher boat speeds) |
Yes |
| Fish Symbol ID (helps identify fish
targets) |
Yes |
| AutoGain Technology (minimizes clutter,
maximizes targets) |
Yes |
| Adjustable depth line (measures depth of
underwater objects) |
Yes |
| A-scope (real time display of fish
passing through transducer beam) |
Yes |
| Water temperature sensor included |
Yes |
Additional Specifications
- Titl/swivel mount
- Integrated GPS
- Mark Waypoints
- Course over Ground (COG)
What's in the Box
- STRIKER 4
- Dual-beam transducer
- Transom and trolling motor mounts
- Tilt/swivel mount
- Power cable
- Documentation
| 
