With Garmin’s NMEA 2000 Fluid Level Analog Adapter aboard your vessel, you
can give new life to your old gauges by making the transition from analog to
digital. This simple-to-install adapter takes the data generated by traditional
analog gauges and converts the data into a NMEA 2000 signal so you can create or
expand your network without replacing all of the equipment on your boat.
Connect to Your Network
With the Garmin GFL 10 adapter, you can convert analog information provided
via the fluid-level sensor (not included) on your boat to your NMEA 2000
network. The GFL 10 allows you to observe fluid-level information on compatible
Garmin display devices connected to your NMEA 2000 network.
Upgrade With Ease
Garmin’s line of NMEA 2000 Analog Adapters are easy to add to any existing
marine network. Once installed, the data from the adapters can be viewed via the
Garmin GMI 10 Digital Marine display and other compatible Garmin devices. This
easy-to-use set-up will help you bring your older dashboard into the digital
age.
Specifications:
Unit dimensions, WxHxL: 31/32" x 43/64" x 3 3/32" (24.7 x 17.0 x
78.6 mm)
Weight: 12.85 oz. (365 g)
Total cable length: 16 ft. (4.9 m)
Temperature range: From 5°F to 158°F (from -15°C to 70°C)
Compass Safe Distance: 2 in. (5 cm)
Power Input Source: 9–16 Vdc from the NMEA 2000 bus
NMEA 2000 Power Usage: 1 W max
NMEA 2000 Load Equivalency Number (LEN): 2 (100 mA)
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty!