For heavy duty use and maximum strength and durability, even under harsh conditions,
the Taylor Made Tuff End inflatable vinyl fender sets the standard while
protecting your boat. These fenders earn their name with their strong
injection-molded ends, which provide extra strength in addition to convenience
for tying off lines. In between the hard ends, the Tuff End fenders are made of
the same flexible and durable vinyl material as the Super Gard, Hull Gard and
Big B fenders from Taylor Made. Another convenient feature on the Tuff End
fenders is the easily accessible side-mounted inflation valve, which is designed
to allow the use of either a hand pump, like needle valve, or an air compressor.
Recommended inflation is 2 PSI.
Taylor
Made Tuff End inflatable vinyl fenders are guaranteed not to burst or split for
the life of your boat.
The Tuff End fenders come in various sizes. Consult expert boaters or marina
personnel for recommendations on the best size fender to use for the size and
weight of your boat and your particular docking situation. You can use the chart
below as a general guideline.
White stock number |
Blue stock number |
Diameter |
Length |
Line Hole Diameter |
Boat Size |
#1182 |
#41182 |
6
inches |
25 inches |
1.0625 inches |
Up to 30 feet |
#1185 |
#41185 |
8
inches |
27 inches |
1.0625 inches |
25 to 40 feet |
#1188 |
#41188 |
10 inches |
30 inches |
1.5 inches |
40 to 50 feet |
#1191 |
#41191 |
12 inches |
35 inches |
1.5 inches |
50 to 60 feet |
#1192 |
#41192 |
15 inches |
41 inches |
1.5 inches |
60 to 70 feet |
#1193 |
#41193 |
19 inches |
50 inches |
1.5 inches |
70 to 80 feet |
#1194 |
#41194 |
24 inches |
57 inches |
1.5 inches |
80 to 100 feet |
#1195 |
#41195 |
32 inches |
77 inches |
1.5 inches |
Over 100 feet |
Taylor Made Tuff End Inflatable Vinyl Fenders - Taylor Made Fenders & Boat Bumpers