Woody Wax Corrosion Protection Restoration (CPR) System Kit
16 oz.
Includes:
- 16 oz Woody Wax
- 8 oz Woody Wax Metal Sealant
- Fine Bronze Wool Pad
- Sponge Brush Applicator
- Instruction Sheet
CPR System Kit:
- The CPR Kit includes everything you need to restore and protect your anodized
aluminum, aluminum, stainless, and chrome from corrosion, saltwater, sunlight,
oxidation, and pollution for six months - GUARANTEED!
- Woody Wax is the first part of the system which breaks down corrosion and hard
water spots, removes oxidation and brightens dulled metal. Simply wipe it on the
metal and let it work - no buffing is required. This corrosion blocking wax can
be used by itself for the protection of metals without leaving a sticky or
slippery feel while lasting for approximately two months. For the restoration of
heavily pitted metal, a bronze wool pad is included. (This wool will not harm
anodized finishes).
- The Woody Wax Metal Wax Sealant is the second part of the system which places a
shell of hard wax over a strong corrosion blocking film, creating a perfectly
safe environment for the metal. This system will create incredible depth, shine,
and protection that will last for half a year or longer, saving you time, money
and most importantly your metal!
Woody Wax:
- Woody Wax is simply the easiest product you will ever use on your entire
boat. Use it on T-Tops, Tuna Towers, Outriggers, Controls, Vinyl Seats,
Fiberglass Non-Skid Decks, Electrical Equipment, Electrical Connections,
Wiring Harnesses, Plexiglass, Engines, Boat Trailers, Fishing Gear,
virtually anything that is affected by Corrosion, Saltwater, Waterspots,
Sunlight, Oxidation.
- Woody Wax is so easy to apply, leaves no sticky film, and gives your
boat lasting protection and showroom look. Try some today, you won't be
disappointed!
Woody Wax Metal Sealant:
- For anodized aluminum, aluminum, chrome, stainless, and more... Prevents
water spots, corrosion, oxidation for up to 6 months, providing lasting
protection, sealing in corrosion blockers, creating incredible depth and
shine.
- For maximum benefits use after treating metals with Woody Wax. Seal your
bright work with Woody Wax Metal Sealant for long lasting, impenetrable
protection, while sealing in corrosion blockers and producing incredible
depth and shine.
For Anodized Aluminum With Rough Blisters Of Corrosion
- Allow Woody Wax to remain on the metal for 24 hours.
- A piece of fine bronze wool sprayed with Woody Wax will break down
corrosion spots rapidly without hurting the anodizing. It may take several
applications to fully restore the aluminum but you should see improvement
with each coat. When visible improvement stops coat your aluminum with Woody
Wax Metal Sealant to lock in corrosion blocking protection for six months or
more.
For Oxidized Anodized Aluminum That Is Smooth But Dull:
- For aluminum that is not blistered, but is extremely dull from oxidation
try putting a small amount of Ultra-Gloss Compound on the cloth with the
Woody Wax while applying it to the metal. Work with very little pressure and
follow the curve of the metal on pipes and follow the length of the metal on
flat pieces. You should see a great improvement. Then seal with Woody Wax
Metal Sealant for lasting protection.
Outriggers:
- Probably the most abused metals on your boat your outriggers. With no
protection from the sun, salt, weather, and pollution, outriggers are
punished and rarely rinsed off properly. While almost never shammed dry or
waxed above an arms length, Woody Wax can restore your riggers to close to
new or keep them new looking and protect them from deteriorating! With the
Woody Wax CPR System, (kit), your riggers will look new and stay that way
for six months guaranteed!
- Use Woody Wax the same as above, only leave Woody Wax on the riggers for
a week before wiping off and sealing with Woody Wax Metal Sealant, (the
longer Woody Wax has to penetrate the better the metal will look when
sealed).
|