|
Details: |
Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".
Rule-Mate Intelligence Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8".
- 2000 GPH (7570 LPH) at 0' (27.2V)
- All-in-one pump and switch
- Extra long life heavy duty motor
- 1" NPS discharge with 1" AND 1 1/8" screw-on ports
- Three year warranty
|
|
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty! |
|
|
|
|
Related Accessories: |
BTL1140 |
BoatLife 1140 Silicone Rubber Tube Clear
|
$9.99 |
|
BTL1141 |
BoatLife 1141 Silicone Rubber Tube White
|
$9.99 |
|
BTL1150 |
BoatLife 1150 Silicone Rubber Cartridge Clear
|
$18.99 |
|
BTL1151 |
BoatLife 1151 Silicone Rubber Cartridge White
|
$18.99 |
|
RUL286 |
Rule Replacement Strainer Base for Rule Mate 1500-2000GPH Pumps
|
$12.99 |
|
|
|
|
|
Rule RULE-MATE 2000 Gph Fully Automated Bilge Pump - 24 Volt - Rule-Mate Automated Bilge Pumps
|