RMK-10 System Remote Control Portrait Keypad
Remote Keypad is an ultra-compact wired keypad
accessory that provides full control of aSeries, cSeries, eSeries, eS Series and
gS Series Multifunction Displays (MFDs) from any mounting location.
The fully backlit RMK-10 includes dedicated keys
for home, menu, zoom in/out, window control, waypoint management,
power/brightness, as well as Evolution autopilot control.
RMK-10 also features the same multifunction
rotary controller with the integrated cursor pad found on eS Series
multifunction displays
The RMK-10 can be surface-mounted or
flush-mounted, and is available with key mats for horizontal or vertical
installation. This gives you the flexibility to install the RMK-10 just about
anywhere.
Utilizing Raymarine’s RayNet high speed
networking, the RMK-10 can be setup to control a single multifunction display,
or multiple displays mounted at the same location. When controlling multiple
displays on the same helm, the RMK-10 provides seamless control across all of
the displays.
When used with aSeries or gS Series Multitouch
displays, the RMK-10 brings full HybridTouch™ control capability to these
products. The RMK-10 integrates seamlessly with the LightHouse II user interface
and allows the navigation system to be operated solely by touch, by keypad, or
any variation between.
Mounting Options
The RMK-10 is the perfect solution for
controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes.
Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.
For the ultimate in convenience, mount the RMK-10
in the arm of your favorite helm chair. Now it’s easy to sit back, relax and
enjoy the ride on autopilot, while still being able to interact with your
navigation system.
RMK-10 is also great for bringing remote system
control to secondary monitors and onboard LCD TV sets connected to the VGA or
HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can
see and control your Raymarine navigation system from a below-deck navigation
table, salon or stateroom.
Specifications
General |
PoE Class |
Class 1 |
Nominal Supply Voltage |
12/24 V dc |
Operating Voltage Range |
10.8 V dc to 31.2 V dc |
Power Consumption |
3.84 W |
Environmental |
Operating Temperature |
-25ºC to +55ºC (-13ºF to 131ºF) |
Storage Temperature |
-30ºC to +70ºC (-22ºF to 158ºF) |
Relative Humidity |
Maximum 75% |
Waterproof Rating |
IPX6 |
Wired Connections |
Network/Power |
1 x RayNet connector | (gS Series - 1000
Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s) |
Alternate Power |
1 x power connector |
What's in The Box
- Keypad
- Landscape keypad mat
- Portrait keypad mat
- Mounting gasket
- 4 x mounting fixings
- Documentation pack
- Right angled power cable 2m (6.6ft)
- RayNet network cable 2m (6.6ft)
|