|
Details: |
|
Raymarine AIS700 Class B AIS with Splitter Model: E70476
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA networking for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC and SeaTalkng Compatible
- Software or hardware switchable Silent Mode for enhanced security when needed
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems. Specifications
| Evironmental | | Operating temperature | -15°C to +55°C | | Storage temperature | -20°C to +75°C | | Water ingress | IPX6 and IPX7 | | Humidity | Up to 93% @ 40°C | | Power | | Power Supply | 12v and 24 nominal | | Power Consumption | <3W | | <3W | 3A | | Load Equivalency Number | 1 LEN | | RF Specifications | | DSC Receiver | Implemented by time sharing with one TDMA receiver | | Receiver 1 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) | | Receiver 2 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) | | Transmitter band | 156.025 MHz to 162.025 MHz (in 25KHz steps) | | Transmitter specification | To meet IEC 62287-2 relevant sections | | Receiver specification | To meet IEC 62287-2 relevant sections | | Transceiver specification | To meet IEC 62287-2 relevant sections | | GPS receiver | u-blox MAX-M8W | | GPS receiver channels | 72 channels | | GPS Cold start acquisition time | 26s nominal | | Positional source | GPS & GLONASS | | AIS performance | 5W SOTDMA | | External Connection | | VHF antenna connector type | SO-239 co-axial | | VHF radio connector type | SO-239 co-axial | | GNSS antenna connector | 50 Ohm TNC co-axial | | NMEA2000 | DeviceNet male | | USB | Micro-B | | External interface isolation | NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification. | | NMEA0183 interface 1 (MFD connection) | NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS. | | NMEA0183 interface 2 (NMEA0183 instrument connection) | NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate | | USB interface (PC connection) | Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud |
What's in the Box:- AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
- GNSS (GPS) Antenna
- Power / data cable 2m (6.56 ft)
- VHF Radio cable 1m (3.28 ft)
- DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)
- GNSS antenna gasket
- GNSS antenna pole mount
- Unit fixings (4 x No.8x19 self tapping screws)
- M5 nut and washer (grounding)
- Documentation kit
- GNSS antenna fixings (3 x M3x40 stud and thumb nut)
- Software CD
|
|
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty! |
|
|
