Toll Free: 866-828-1033
Boatersland Marine > Electrical > Chargers/Inverters > Magnum Chargers/Inverters > Magnum MS2012 2000W Inverter 12V W/50A Pfc Charger
  Magnum MS2012 2000W Inverter 12V W/50A Pfc Charger
Click to enlarge

Magnum MS2012 2000W Inverter 12V W/50A Pfc Charger

Item #: MGNMS2012

 

Quantity:

Minimum advertised price:

$1,735.20

 
Add to Cart =>
 
In Stock - Ships the next business day.
No restocking fees on return.
 
Click to verify BBB accreditation and to see a BBB report.  

Details:

Magnum MS2012 Inverter/Charger

The MS Series Inverter/Charger from Magnum Energy – a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

Features

  • Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
  • Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.
  • Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
  • Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
  • Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded transfer relay: 60 Amp transfer service is available on all models.

Inverter Specifications

Input battery voltage range 9 - 17 VDC
Nominal AC output voltage 120 VAC
Output frequency and accuracy 60 Hz ± 0.1%
Total Harmonic Distortion (THD) < 5%
1 msec surge current (amps AC) 50
100 msec surge current (amps AC) 33
5 sec surge power (real watts) 3300
30 sec surge power (real watts) 3100
5 min surge power (real watts) 2800
30 min surge power (real watts) 2200
Continuous power output at 25° C 2000 VA
Maximum continuous input current 266 ADC
Inverter efficiency (peak) 89%
Transfer time 16 msecs
Search mode (typical) 7 watts
No load (120 VAC output, typical) 25 watts
Waveform Pure Sine Wave

Charger Specifications

Continuous output at 25° C 100 ADC
Charger efficiency 85%
Power factor > .95
Input current at rated output (AC amps) 15

General Features and Capabilities

  • Transfer relay capability MS2000: 30 A single input, MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
  • Five stage charging capability: Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver
  • Battery temperature compensation 15 ft Battery Temp Sensor standard
  • Internal cooling: 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
  • Overcurrent protection with two overlapping circuits
  • Overtemperature protection on transformer, MOSFETS, and battery
  • Conformal coating on PCB’s for corrosion protection
  • Powder coated chassis & top for corrosion protection
  • Stainless steel fasteners for corrosion protection
  • Listings: ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
  • Operating temperature: -20° C to +60° C (-4° F to 140° F)
  • Nonoperating temperature: -40° C to +70° C (-40° F to 158° F)
  • Operating humidity: 0 to 95% RH non condensing
  • Dimensions: (l x w x h) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
  • Mounting: Shelf (top or bottom up) or bulkhead (vents up)
  • Max operating altitude: 15,000’ (4570 m)


Did you Know?

ALL products we sell are factory new and come with the full Manufacturers Warranty!
 

Related Accessories:

Item # Description Price Order
MGNME300F Magnum 300A Class T Fuse Kit
Minimum Advertised Price
MAP Price
$79.20
Add to cart
MGNMERC50 Magnum ME-RC50 Remote Panel With 50' Cable
Minimum Advertised Price
MAP Price
$183.20
Add to cart


Magnum MS2012 2000W Inverter 12V W/50A Pfc Charger - Magnum Chargers/Inverters