The Jabsco Oil Change System is designed to beinstalled in a vessel’s engine
room with its manifold andvalves permanently plumbed to the vessel’s engines’
oilpans or transmissions’ oil sumps. The manifold is factoryfitted with three
ball valves to serve three different oilreservoirs and may be fitted with two
additional ballvalves to drain up to five oil reservoirs. The system canbe used
to remove old oil from an engine or transmissionthen reversed, with the integral
reversing switch, to pumpa measured amount of new oil back into the engine
ortransmission. Each connection to an engine is controlledby a dedicated full
flow ball valve. The system’s coverprovides an attractive appearance, fully
shrouding theentire pump and manifold system. It also provides addedprotection
against accidental draining of an engine’s oilsupply because the valve cover
protects the factorysupplied valves from being accidentally bumped
open.Additionally, at the end of an oil change, the cover will notclose unless
the factory supplied valves are in the fullyclosed position.
Specifications:
Body: Bronze
Impeller: Nitrile
Seal: Nitrile Lip Type
Valves: 1/2" NPT Full Flow Ball Type
Voltage: 12 Vdc
Motor: Reversible Permanent Magnet With Integral Reversing Switch; Complies
with USCG 183.410 and ISO 8846 Marine
Dimensions: 15.9 x 27.6 x 26 cms 6-1/4 x 10-7/8 x 10-3/16 inches
Weight: 9 lb 4.1 kg
Amp Draw: 10 amp
Fuse Size: 15 amp
Did you Know?
ALL products we sell are factory new and come with the full Manufacturers Warranty!
