Icom M605 Fixed Mount VHF with AIS Receiver
The M605 is not just a radio. It’s a system that
allows the user choices on how to set up the radio with up to three stations.
Boaters can now add an exclusive complete display as another station on the
vessel along with two COMMANDMICS™. Customers will appreciate the radios large
bright display that includes night mode to view easily in the dark. The full
featured M605 also gives customers the option of the radio with an integrated
AIS receiver. The best just got better
Output Power |
25W |
Hailer |
30W listen back hailer |
Horn/Foghorn |
Built-in |
GPS |
GNSS antenna included |
Waterproof Rating |
IPX8 |
Configuration flexibility
The M605 gives the user flexibility in setting up
their radio system on their boat. Remotely control up to three controllers using
all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600
Command Head. Either option can be used as an intercom between the radio and the
unit, as well.
Use one of the three combinations when setting up
your M605:
- M605 + three COMMANDMICS
- M605 + two COMMANDMICS + one Command Head
- M605 + two Command Heads + one COMMANDMIC
Large color display
Bring on the color. The M605’s large 4.3” color
TFT LCD display provides nearly a 180 degree viewing angle. The high resolution
characters and function icons along with the directional keypad and soft keys
provide an intuitive user interface. The night mode screen provides comfortable
operation in the dark. Most used functions are assigned to soft keys (at the
bottom of the display) for quick one push function access. The large ten-key pad
enables users to smoothly enter channel numbers, MMSI numbers with ID names and
much more.
NMEA 2000™ and NMEA 0183 connectivity
Using NMEA 2000™ connectivity, the radio can
exchange GNSS, AIS reports, DSC call information data, radio frequency, and PGN
list data on the network. NMEA 0183/-HS GNSS position data can also be converted
to NMEA 2000™ data for other equipment.
Integrated AIS receiver
The M605 with the integrated AIS receiver can
show AIS vessel traffic information on the display. The AIS combo screen enables
you to monitor the AIS plotter during basic operation. The M605 also allows the
user to directly call a selected AIS target from the AIS screen using an
individual DSC all.
Additional features
- Active noise cancelling
- Last call voice recording saves the last two
minutes of the last incoming call or start recording manually
- Integrated GNSS receiver
- Class D DSC
- Weather & alert channels
- AquaQuake® draining function
- Instant access to channel 16 and channel 09
call channel
Specifications
General |
Frequency Range
Tx
Rx
CH70
AIS1, 2 |
156.025–161.600 MHz
156.025–162.000 MHz
156.525 MHz
161.975, 162.025 MHz |
Usable channels |
USA, CAN, INT, WX channels |
Type of emission |
16K0G3E (FM), 16K0G2B (DSC) |
Power supply requirement |
13.8 V DC (11.7–15.9 V DC) |
Current drain
Tx (at 25W output)
Rx (Maximum audio) |
6.0 A
8.0 A |
Operating temperature range |
–20°C to +60°C; –4°F to +140°F |
Antenna impedance |
50Ω (SO-239) |
Weight (approx.) |
1510 g; 3.3 lb |
Transmitter |
Output power (at 13.8 V DC) |
25W, 1W |
Max. frequency deviation |
±5 kHz |
Frequency tolerance |
±5 ppm |
Spurious emissions |
Less than –70 dBc (at 25 W) |
Adjacent channel power |
More than 70dB |
Resicual modulation |
More than 40dB |
Receiver |
Intermediate frequency
CH70 |
30.15MHz, 450kHz (1st/2nd)
21.70 MHz, 450 kHz (1st/2nd) |
Sensitivity 12dB SINAD
CH70 (1% BER) |
0.22 μV typical
0.71 μV emf typical |
Adjacent channel selectivity
CH70 (1% BER) |
More than 80dB
More than 80 dBμ emf |
Spurious response
CH70 (1% BER) |
More than 77dB
More than 73dBμ emf |
Intermodulation
CH70 (1% BER) |
More than 80dB
More than 73dBμ emf |
Hum and noise ratio |
More than 40dB |
Audio output power
External speaker |
(at 10% distortion)
More than 15W with a 4Ω |
Applicable IP Rating |
Ingress Protection Standard |
IPX8 (1 m depth water for 60 minutes) |
Supplied Accessories
- Speaker microphone, HM-205RB
- GNSS antenna, UX-241
- Microphone hanger
- DC power cable
- Mounting bracket kit
|