|
TRUECHARGE 2 Battery Charger
Redesigned, High Performance, Worldwide Charging Xantrex TRUECHARGE 2 Battery
Chargers lead the industry with a small footprint and ultra-compact design.
Product Info
In addition to meeting global safety and regulatory standards, TRUECHARGE2
Battery Chargers feature low electrical interference and superior, efficient,
power factor corrected multistage charging. TRUECHARGE2 Battery Chargers can be
mounted virtually anywhere, given their unique drip-proof design. With certified
ignition protection, even a gasoline engine room is an alternative for
installation*. Trouble-free installation is ensured with easy-to-access AC and
DC wiring compartments and reverse-polarity battery protection.
Designed primarily for marine and commercial applications worldwide,
TRUECHARGE2 Battery Chargers are unmatched for reliability. Available in two
12-volt models, they are versatile enough to be used in a wide variety of
conditions and locations. Auto-ranging AC input voltage capability (90 - 265
volts AC) makes traveling abroad and handling poor-quality power a breeze. The
easy-to-read display can be augmented with an optional remote panel.
Performance Features
- 12-volt models available in 20 A, 30 A and 40 A
- Microprocessor-controlled, multistage charging algorithms
- Settings for two and three-stage charging
- Settings for flooded, gel, AGM or lead-calcium batteries
- Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz) is also
compatible with a generator or other low-quality power sources
- Temperature-compensated charging
- Power factor corrected for efficient charging
- Battery-equalization feature
- Ability to charge ‘dead’ batteries
- Battery temperature sensor available (Part #808-0232-01)
- Optional remote display includes a maximum charger output control (Part
#808-8040-00)
Protection Features
- Reverse battery polarity protection
- Drip-proof design
- Over and under-temperature protection
- DC over-voltage protection
- Battery overcharging protection
- Ignition protection
* Xantrex recommends, however, that it is safest not to install electrical
equipment in these areas.
Specifications:
|
Electrical Specifications (@ 25°C
unless otherwise noted) |
|
Models |
TRUECHARGE2 20 / 40 |
|
Output current (nominal) |
20 A / 40 A |
|
Output voltage (nominal, depending on
settings) |
|
Charge |
14.2 - 15.5 Vdc |
|
Float |
13.4 - 13.8 Vdc |
|
Equalize |
16 Vdc |
|
DC output connections |
Three |
|
AC input voltage 1 |
90-265 Vac 47-63 Hz |
|
|
120 Vac, 230 Vac, 240 Vac nominal |
|
Temperature compensation |
Three settings or optional remote battery
temperature sensor |
|
Charger efficiency |
> 80% |
|
Battery type |
Gel, Flooded, AGM and Pb-Ca |
|
Recommended battery size |
100 Ah to 400 Ah |
|
|
|
|
General Specifications |
|
|
Models |
TRUECHARGE2 20 / 40 |
|
Operating temperature 2 |
0 to 65°C |
|
Storage temperature |
-40 to 80°C |
|
Battery connection |
Three positive terminals |
|
|
One negative terminal |
|
Dimensions (H x W x L) |
2.8 x 6.7 x 9.8” |
|
|
(70 × 170 × 250mm) |
|
Weight |
4.8 lb (2.2 kg) |
|
Warranty |
Two year |
|
Part Numbers |
804-1220 |
|
|
804-1240 |
|
|
|
|
Remote Panel |
808-8040-00 |
|
Battery Temperature Sensor |
808-0232-01 |
Regulatory & Environmental Compliance
CSA E60335-2-29, UL1564, and UL1236 including the Marine Supplement, drip
test, and Ignition Protection ratings. CE Marked for the Low Voltage Directive
(safety) and the EMC Directive. Complies with IEC 60335-2-29 including
Australian deviations. Ingress protection rating IP32 per EN/IEC 60529. Complies
with FCC Part 15B and Industry Canada ICES-003 Class B emissions limits.
Complies with ABYC A-31.
1 90 - 105 Vac ± 4 Vac output de-rated to 80% of full load current.
2 Between 50° and 65°C DC output current de-rated. Highly Accelerated Life
Tested (HALT) to -20°C.
Note: Specifications subject to change without notice.
Three-Stage Charging
Multistage charging ensures batteries receive optimum charging, but with
minimal wear and tear, regulating the voltage and current delivered to the
batteries in three automatic stages:
- Bulk: Replaces 70-80% of the battery’s state-of-charge at the fastest
possible rate.
- Absorption: Replenishes the remaining 20-30% of charge, bringing the
battery to a full charge at a slow, safe rate.
- Float: Voltage is reduced and held constant in order to prevent damage
and maintain batteries at a full charge.
Power Factor Corrected (PFC)
Less shorepower is required for charging batteries, freeing up more usable AC
power for running electrical devices and appliances and reducing the likelihood
of tripping shorepower breakers.
|
