Toll Free: 866-828-1033
Boatersland Marine > Boats/Boat Motors > Motor Jack Plate > T&H Marine 65301 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" With Gauge
  T&H Marine 65301 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" With Gauge
Click to enlarge

T&H Marine 65301 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" With Gauge

Item #: THM65301

 

Quantity:

25%

List Price:

$1,388.39

Price:

$1,044.99

 
 
In Stock - Ships the next business day.
No restocking fees on return.
 
Click to verify BBB accreditation and to see a BBB report.  

Details:

Made of 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. Ideal for fresh or salt water use. No welds or castings to break.
The dependable, self-contained and water proof hydraulic actuator has a maximum lifting capacity of 7853 pounds of thrust. More than any other transom jack. You will have no problem lifting even a V-6 300 hp max. motor at full throttle.

The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks. The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). It contains a permanent magnet motor for more power and constant torque. The cylinder within the actuator has twice the lifting capacity than other transom jacks on the market. It contains a no-leak seal and wiper that keeps dirt and water out of the working parts. The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.

The patented roller design means less friction, longer wear, less maintenance, and virtually no binding problems which are common with other transom jacks. The roller assembly contains a stainless steel 3/4" pin with aluminum-bronze alloy rollers. The roller is highly impact resistant, corrosive resistant, and has a high load carrying capacity. This patented design virtually eliminates any chance of binding which is common with other transom jacks.

The PL-65 is rated for V-6 motors and smaller and gives you 5" of vertical travel with 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket. A total of 8” of possible adjustment.

  • Full stroke in 8 seconds.
  • CMC, PL-65 HS high speed hydraulic jack plate, 5 1/2", with gauge


Did you Know?

ALL products we sell are factory new and come with the full Manufacturers Warranty!

Related products
T&H Marine AHJM4DP 4" Atlas Micro Jacker Jack Plate |  T&H Marine JP4FADP 4" Hi-Jacker Fixed Jack Plate |  T&H Marine JP1ADP H-Jacker Manual Jack Plate |  T&H Marine JP6PWDP Pro Hi-Jacker Manual Jack Plate |  T&H Marine AHJ6VDP Atlas Hydraulic Jack Plate - 6" Setback |  T&H Marine AHJ8VDP Atlas Hydraulic Jack Plate - 8" Setback |  T&H Marine AHJ4VDP Atlas Hydraulic Jack Plate - 4" Setback |  T&H Marine 65301 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" With Gauge |  T&H Marine 65302 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" Without Gauge |  T&H Marine AHJ10VDP Atlas Hydraulic Jack Plate - 10" Setback |  T&H Marine AHJ12VDP Atlas Hydraulic Jack Plate - 12" Setback |  T&H Marine HYJ10CDP Hydraulic Jack Plate - 10" Setback |  T&H Marine JPZ10DP Z-Lock Manual Jack Plate - 10" Setback |  T&H Marine JPZ6DP Z-Lock Manual Jack Plate - 6" Setback |  T&H Marine JPZ8DP Z-Lock Manual Jack Plate - 8" Setback |  T&H Marine HYJ10HSCDP High Speed Hydraulic Jacking Plate - 10" Set Back

T&H Marine 65301 PL-65 HS High Speed Hydraulic Jack Plate, 5-1/2" With Gauge - Motor Jack Plate