|
The revolutionary new retro-fit surface mount underwater light provides
possible installation without the need for haul out with no hole penetration
below the waterline.
Often there are areas on a vessel which make it impossible to install a thru
hull fitting, such as frames, fuel tanks, etc. The Surface Mount attaches simply
to the outer surface of the hull and the power cable enters the hull above the
waterline, which then allows even spacing of lights as a combination of Thru
Hull or Flush Mount lights can be used alongside a Surface Mount as all LEDs and
colors are identical, its only the mounting style/method that alters.
Internally bonded, with custom over molded cable entry and uses salt water proof
cabling.
Beware of cheap imitations of this style of light.
Suitable for Fiberglass, GRP, wooden and aluminum/steel hulls.
Lloyds Type Approved, RINA, ABS Type Approved, USCG Ignition Protected.
All lights utilize Tritonium Optical lenses, and are supplied with a quick
connect system by Deutsch ensuring almost 'fool proof' installation and
compliance with ABYC, E11 regulations.
| Specifications |
Size:
DiameterProfile |
153mm / 6"35mm / 1 3/8" |
| Extension Cable Length |
5m / 16 1/2' as standard |
| Hole Cut-Out for Cable Entry |
22mm / 7/8" |
| Lens Angles 50º Full Beam |
Standard |
| Colors Available |
White and Blue SuperLEDs |
| Material |
Aluminum Bronze AB2 |
| Lens |
Tritonium Optical Lens |
| LED Life |
40,000+ Hours |
| Color Temperature of Super White |
10,000 Kelvin |
| Ideal Installation Depth to top of fixture |
10-12" |
| Recommended Spacing |
4-10' |
|
