Jabsco Y-VALVE - Jabsco 45490-1000 - ITT Jabsco Repair Parts - Marine Heads and Portable Toilet Parts - Plumbing/Ventilation

        
        $('#slideshow5').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 4000
                                ,

            pager: '#slideshow_page_info5'
                    

        });

← Previous product

Click to enlarge

Details:

Y-Valve

The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. Check local and Federal regulations to determine where direct overboard discharge of untreated waste is permitted. No overboard discharge of untreated waste is allowed within three miles of shore.

Some near shore areas and inland areas are designated as "No-Discharge Zones" where the discharge of any onboard waste, even treated waste is strictly prohibited. Many of these areas require a waste retention system that can be positively secured in an onboard retention mode. The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. The Y-Valve may also be used to direct waste from a holding tank to an onboard waste discharge pump for holding tank evacuation or, alternatively, to a waste deck plate for removal by a shoreside pump-out facility.

The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups in different bilge compartments providing for evacuation of two separate bilge areas with only one bilge pump.

Features:

Chemical and corrosion resistant polypropylene and stainless steel construction
Selector lever can be padlocked (lock not included) and/or sealed in either position
Ports can be rotated so discharge plumbing can be routed away in parallel, at 900 or in opposite directions, or either up or down without disassembly
Valve is supplied with both 1-1/2" (38 mm) ports (fitted) and extra 1" (25 mm) straight inlet port
Optional shaft extension allows valve to be mounted through a bulkhead up to 1-3/4" thick with only the selector handle exposed
Self cleaning design provides trouble free operation
Molded in flow direction indicator arrows
Easy access to three sturdy mounting feet for quick and simple installation
Easy access to valve by removal of just three hex head machine screws, top cover and diverter assembly lift away from the body

Did you Know?

ALL products we sell are factory new and come with the full Manufacturers Warranty!

Related products
ITT Jabsco 10400000 Seal | ITT Jabsco 290453000 Service Kit | ITT Jabsco 290420000 Top Valve Gasket | ITT Jabsco 290450000 Pump Major Service Kit | ITT Jabsco 290512000 Pump Cylinder Assy | ITT Jabsco 290403000 Manual Head Pump Assembly | ITT Jabsco 290411000 Base Assembly | ITT Jabsco 290921000 Valve Gasket | ITT Jabsco 292000120 12V Electric Flush Pump Converter | ITT Jabsco 291010000 Service Kit | ITT Jabsco 370100092 Par 12V Toilet Conversion Kit | ITT Jabsco 370400000 Electric Toilet Conversion Seal & Gasket Service Kit | ITT Jabsco 370550092 Quiet Flush Conversion Kit with Solenoid | ITT Jabsco 290971000 Compact Bowls Toilet Seat | ITT Jabsco 370720092 Toilet Pump & Motor Assembly | ITT Jabsco 187530554 12V Motor | ITT Jabsco 901970000 Seal Kit | ITT Jabsco 370200000 Par 12V Push Button Switch Assembly | ITT Jabsco 370041000 Spare Base Kit | ITT Jabsco 370640000 12V Spare Motor | ITT Jabsco 370410010 Spare Motor Pump Assembly | ITT Jabsco 441061000 Joker Valve | ITT Jabsco 439900066 Round O-Ring | ITT Jabsco 370682000 Electric Toilet Solenoid Vacuum Valve Kit | ITT Jabsco 290150000 3/4" Vented Loop | ITT Jabsco 290150010 1-1/2" Vented Loop | ITT Jabsco 290150020 1" Vented Loop | Jabsco Sealed Macerator SELF-PRIMING Pump | Jabsco IN-LINE NON-RETURN Valve - 3/4" | Jabsco PAR-MAX 3 Shower Drain Pump 12 Volt 3.5 GPM | Jabsco Y-VALVE | Jabsco Lite Flush Electric 12 Volt Toilet with Footswitch | Jabsco Lite Flush Electric 12 Volt Toilet with Control Panel | Jabsco IN-LINE Water Pressure Regulator 45PSI - White | Jabsco Flush Mount Water Pressure Regulator 45PSI - White | Jabsco Flush Mount Water Pressure Regulator 45PSI - Chrome | Jabsco Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter X 3-1/2" W, 1" Shaft Diameter | Jabsco Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline Drive | Jabsco Macerator Pump - 115V | Jabsco Service Kit for Manual 29090 & 29120 Series Toilets - 1998-2007 | Jabsco SS Bolt Kit for Older 18590 Series Macerator Pumps | Jabsco Motor Cover for 37010 Series | Jabsco Impeller Kit - 10 Blade - Neoprene - 2" Diameter X 7/8"W Pin Drive Insert | Jabsco Water Pressure Regulator - Flush Mount - White | Jabsco Neoprene Impeller Kit with Cover, Gasket Or O-Ring - 6-BLADE - 5/16 Shaft Diameter | Jabsco Rinse Pump for 37045 & 37245 Series Toilets - 12 Volt | Jabsco Base Valve Gasket for 29090 & 29120 Series Toilets | Jabsco Stainless Steel QUICK-RELEASE Hose Deck Mount Fitting and Hose Adapter | Jabsco .65L Mini Accumulator Tank with Internal Bladder | Jabsco Flush Mount Hose Adapter | Albin Pump Marine Vented Loop 25 | Albin Pump Marine Vented Loop 38 | Albin Pump Marine Solenoid Valve - 24 Volt | Albin Pump Marine Flush Pump - 12 Volt | Albin Pump Marine Compact Seat | Albin Pump Marine Toilet Pump | Albin Pump Marine Y-VALVE HD | Albin Pump Replacement Cartridge for 500GPH - 12 Volt | Albin Pump Solenoid Valve - 12 Volt | Jabsco IN-LINE NON-RETURN Check Valve - 1" | Jabsco IN-LINE NON-RETURN Check Valve - 1-1/2"

Jabsco Y-VALVE - ITT Jabsco Repair Parts

        
        $('#slideshow6').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 4000
                                ,

            pager: '#slideshow_page_info6'
                    

        });

Shopping Cart
Sitemap
Index
Boating Links

Returns
Contact Us
Privacy Policy
Company Info

9:30 AM - 5:00 PM Eastern, Monday - Friday