Icom IC-M710 MF/HF Marine Transceiver

1136 channels
160 user-programmable, 242 ITU SSB duplex, 72 ITU SSB simplex and 662 ITU FSK duplex channels are available.

Rugged construction
The highest quality components are used throughout. Constructed in a die-cast aluminum chassis with surface mount components, the IC-M710 is designed for long hours of operation in the harsh marine environment.

Alphanumeric readout
The large, easy-to-read display shows status at a glance. Seven characters can be programmed into each memory channel to conveniently display station manes, ship names, etc.

150 W of output power
A full 150 W (PEP) of output power is available for reliable long distance communication. A large cooling fan, in combination with the aluminum chassis, allows continuous transmission at full output power - even during demanding RTTY (radio teletype) and NBDP (narrow band direct printing) operation.

Automatic tuning function
An automatic tuning function is available when using the IC-M710 in combination with the optional AT-130/E for quick and easy antenna tuning. Tuning is fully automatic. When you push the PTT on a new frequency, the antenna tuner quickly tunes the antenna automatically.

Easy to use
Two large memory and frequency dials allow quick and easy operation.

GMDSS versions available (not available in the US)
Versions which comply with GMDSS requirements are available (not available in the US). With the addition of an IC-GM110 DSC terminal the radio meets DSC class A requirements.

And more...

• Covers all allowed bands between 1.6 and 27.5 MHz
• General coverage receiver
• Modes: SSB, RTTY, CW and AM
• 2182 kHz alarm optional
• RF gain control
• Audio activated squelch
• Terminals for frequency/mode control via NMEA interfacing
• Direct keypad channel selection entry
• Large, front-mounted speaker
• Weather fax ready
• Backlight control
• CW full break-in and semi break-in

• Frequency Coverage:
  • Receive: 500 kHz-29.999 MHz
  • Transmit: Marine bands and Ham bands 1.6-27.5 MHz
• Mode: J3E (USB), H3E, J2B (AFSK), F1B (FSK), R3E, A1A (CW)
• Number of channels: 1136 (max.) (160 user-programmable; 242 ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex)
• Antenna Impedance: 50 ohms (nominal)
• Usable Temperature Range: -30 to +60¦C (-22 to +140¦F)
• Frequency Stability: +/-10 Hz (-30 to +60¦C; -22 to +140¦F; +/-20 Hz above 15 MHz)
• Power Supply Requirement: 13.6 V DC +/-15%
• Current Drain (at 13.6 V DC): Transmit (max. output power) 30 A; Receive (max. audio output) 2.5 (negative ground type), 3 A (floating ground type)
• Dimensions: 291.4(W) x 116.4(H) x 315(D) mm; 11-15/32(W) x 4-19/32(H) x 12-13/32(D) in (projections not included)
• Weight: 7.9 kg; 17 lb 7 oz (negative ground type); 8.1 kg; 17 lb 14 oz (floating ground type)

• Output Power: 150, 60, 20 W PEP (selectable) (60, 20 W only for 25 MHz band)
• Spurious Emissions: -65 dB
• Carrier Suppression: 40 dB
• Unwanted Sideband Suppression: 55 dB
• Microphone Impedance: 600 ohm

• Sensitivity J3E, R3E, J2B, F1B, A1A (for 12 dB SINAD):
  • 0.5 ¦V (1.8-29.9999 MHz)
  • 1 ¦V (1.6-1.7999 MHz)
  • 6.3 ¦V (0.5-1.5999 MHz)
• Sensitivity H3E (10 dB S/N):
  • 3.2 ¦V (1.8-29.9999 MHz)
  • 6.3 ¦V (1.6-1.7999 MHz)
  • 32 ¦V (0.5-1.5999 MHz)
• Spurious Rejection Ratio: 70 dB (1.6-29.9999 MHz)
• Audio Output Power: 4.5 W at 10% distortion with a 8 ohm load
• Audio Impedance: 4 to 8 ohms
• Clarity Variable Range: +/-150 Hz